4.5/5 mm Locking LCP Narrow Plate Specification

SKU: FP-114 Category:


4.5/5 mm Locking LCP Narrow Plate Specification
Plates available holes are 6, 7, 8, 9, 10, 12, 14, 16, 18 and 20.
Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
The shaft holes accept 5 mm locking screws in the threaded portion or 4.5 mm cortical screws or 5 mm Locking cancellous screws in the compression portion.
The symmetrical shape of the plate holes enables compression to be achieved in both directions.
The hole spacing in the plate is regular. Plate positioning is thus not restricted by the presence of a mid-section. This is of particular advantage in comminuted or segmental fractures.
4.5/5 mm Locking LCP Narrow Plate allow implant placement to address the individual fracture pattern.
Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
Choice of different lengths of plate eliminates the need to cut plates.
Pre-contoured plate to match anatomical shape.
Available in both Titanium and Stainless steel.
locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
A complete Instruments Set is available for 4.5/5 mm Locking LCP Narrow Plate. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.
4.5/5 mm Locking LCP Narrow Plate Uses
4.5/5 mm Locking LCP Narrow Plate is intended for fixation of various long bones, such as the humerus, femur and tibia. These are also used in fixation of peri-prosthetic fractures, osteopenic bone and fixation of nonunions and malunions in adult patients. The oval shaped hole is designed to create dynamic pressure between the fractured bone fragments.


There are no reviews yet.

Be the first to review “4.5/5 mm Locking LCP Narrow Plate Specification”

Your email address will not be published. Required fields are marked *