3.5 mm Locking LCP Plates Specification

Description

3.5 mm Locking LCP Plates Specification
Plates available holes are 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 and 22.
Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
The shaft holes accept 3.5 mm locking screws in the threaded portion or 3.5 mm cortical screws or 4 mm cancellous screws in the compression portion.
3.5 mm Locking LCP Plates allow implant placement to address the individual fracture pattern.
Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
Choice of different lengths of plate eliminates the need to cut plates.
Available in both Titanium and Stainless steel.
locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
A complete Instruments Set is available for 3.5 mm Locking LCP Plates. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.
3.5 mm Locking LCP Plates Uses
3.5 mm Locking LCP Plates are designed to be used for the treatment of smaller bones particularly on Forearms and Humerus.
Low contact plate design allows smooth contour of plate to bone and limits Vascular Trauma to the bone.