SKU: FP-106 Category:


3.5 mm Locking Anterolateral Distal Tibia Plates Specification
Plates available holes are 5, 7, 9, 11, 13, 15 and 17
Plates available for Left and Right both direction
Plate has combi holes and round holes. Combi holes allow fixation with locking screws in the threaded section and cortex screws in the dynamic compression unit section for compression.
The shaft holes accept 3.5 mm locking screws in the threaded portion or 3.5 mm cortical screws or 4 mm cancellous screws in the compression portion. Distal locking holes in plate head accept 3.5 mm locking screws.
3.5 mm Locking Anterolateral Distal Tibia Plates allow implant placement to address the individual fracture pattern.
Limited-contact surface reduces bone-to-plate contact and helps to preserve the periosteal blood supply.
Choice of different lengths of plate eliminates the need to cut plates.
Pre-contoured plate to match anatomical shape.
60 degree twist in shaft is contoured for the distal tibia anatomy.
Tapered tip for submuscular insertion.
Distal locking screws provide support for the articular surface.
Available in both Titanium and Stainless steel.
locking plate increases construct stability, decreases risk of screw back-out and subsequent loss of reduction. It also reduces the need for precise anatomic plate contouring and minimizes the risk of stripped screw holes.
A complete Instruments Set is available for 3.5 mm Locking Anterolateral Distal Tibia Plates. General Instruments are available for this plate such as Plate Bending Press, Plate Holding Forceps, Plate Bending Pliers, Bone Holding Forceps, Bone Elevators, Bone Cutter, Bone Nibbler, Depth Gauge, Sleeve, Screw Driver, Trocar Sleeve etc.
3.5 mm Locking Anterolateral Distal Tibia Plates Uses
3.5 mm Locking Anterolateral Distal Tibia Plates are indicated for fractures, osteotomies and nonunions of the distal tibia, particularly in osteopenic bone.


There are no reviews yet.

Be the first to review “3.5-mm-Locking-Anterolateral-Distal-Tibia-Plates”

Your email address will not be published. Required fields are marked *